Autocollimators with CCD-Camera Mount
Type AKR CCD - 90°-viewing
Type AKR CCD - 90°-viewing
Product description
In autocollimators with C-mount camera connection, the chip surface of a C-mount camera is located in the image plane of the objective instead of the eyepiece reticle. The camera thereby records the image of the collimator reticle. The displacement of the reflected image can be determined using a monitor or computer with appropriate software.
Notes of ordering
In case of order please note the following hints:
- CCD camera and computer hardware/software are NOT included.
- A suitable CCD/CMOS camera is optionally available.
- A bulb illumination (6V/6W, without transformer) and a collimator reticle are already included in the scope of delivery. Transformer or other illumination (LED illumination) can be ordered separately.
- For angle measurement, the autocollimator is usually equipped with a negative reticle (e.g. 208 112).
- Resolution test or Siemens star reticles can be used to check the imaging quality.
- Unless otherwise specified, the adjustment is made to infinite distance of the reticle image at a wavelength of 525 nm. Adjustment to other distances or wavelengths is also possible.
- Since this autocollimator does not have an eyepiece reticle, direct measurement of collimator reticle deposition is not possible. A computer with evaluation software is therefore additionally required.
- For inquiry or order you can specify either the article number of the desired product or/and the article description. The article description for autocollimators with CCD camera connection is shown on the right.
Small-size Apertures
*Calculated for 2/3\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" CCD Camera
Mid-size Apertures
*Calculated for 2/3\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" CCD Camera
**Compact design
Large-size Apertures
*Calculated for 2/3\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\" CCD Camera